This is most likely due to your print speed being set too low or density set too high. Please set your print speed to "5 in/sec" and density to "4" and print.

 

The exact number for darkness and print speed depends on the type of label you are using. We recommend starting with 4 and 4. If your print is too light, please increase the darkness setting number to get a darker print.


For Mac

①Select "Printer Features" in "Preview" 


②Set the print density in "Darkness" 


③Set the print speed in "Print Speed" 



For Windows

①Open “Devices and Printers” -> right click on “Label Printer” -> choose “Printer Preferences” -> click “Advanced”


②Set the print speed in "Speed"


③Set the print density in "Density"